Ford Performance
5.0L Coyote Mustang Gen 3 Crate Engine
5.0L Coyote Mustang Gen 3 Crate Engine
SKU:M-6007-M50C
Couldn't load pickup availability
The Ford Performance all-aluminum 2018-2020 5.0L Coyote crate engine is a modern 5.0L 32-valve DOHC V-8 that uses advanced features like Direct and Port Fuel Injection, Twin Independent Variable Camshaft Timing (Ti-VCT), high-flow cylinder heads, and heightened compression ratio to deliver 460 horsepower @ 7,000 rpm and 420 ft.-lb.+ of torque @ 4,600 rpm (with premium fuel). The lightweight plasma transferred wire arc spray aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, optimized oil drainback and windage control to improve high-rpm performance.
- 460 Horsepower @ 7,000 rpm
- 420 ft.-lb.+ of Torque @ 4,600 rpm
- 12.0:1 Compression ratio
- Hypereutectic aluminum pistons
- Sintered steel connecting rods as used on BOSS302 Mustang
- Forged steel crankshaft
- Aluminum block which features plasma transferred wire arc spray weld liner coating
- Longer, 12 mm head bolts for higher clamp load
- 10 qt capacity oil pan
- Tuned composite intake manifold provides efficient air delivery and weight savings
- 80 mm single bore "drive by wire", electronic throttle body with variable runner control
- High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing
- Includes engine harness and dual mass flywheel, for engine equipped with automatic flex plate, see M-6007-M50CAUTO
- Engine mount bosses and bell housing mount pattern common to 4.6L modular engines
- Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY
- Vehicle harness and PCM not included
- Use Ford Performance M-6017-M50B Control Pack which includes wiring, PCM and installation kit, designed for project car installation
- Does not include alternator, for alternator kit see M-8600-M50BALT or M-8600-M50ALTA
- 5.0L Coyote air conditioning kit available, see M-8600-M50AC
- 5.0L Mustang motor mount kit available, see M-6038-M50
- 5.0L Mustang engine cover kit available, see M-9680-M50B
- Photo and specs may vary
- Engine weight: 445 lbs.
Return Policy
Return Policy
You have 7 calendar days to return an item from the date you received it. To be eligible for a return, your item must be unused and in the same condition that you received it. Your item must be sealed in the original packaging. Your item needs to have a receipt or proof of purchase. Some exclusions apply.
For additional details see our Return & Refund Policy.
Installation Guides
Installation Guides
To see all available installation and break-in instructions, click here.
Disclaimers & Legal
Disclaimers & Legal
This part has been designed and is intended for off-highway application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations relating to emission requirements and motor vehicle safety standards.
Click Here for emissions compliance information.
California Residents Prop 65 Information
California’s Proposition 65 entitles California consumers to special warnings for products that contain chemicals known to the state of California to cause cancer and birth defects or other reproductive harm if those products expose consumers to such chemicals above certain threshold levels. This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information visit www.P65warnings.ca.gov.
-
Free Shipping Sitewide
Learn MoreOrders of $100.00 or more are eligible for free ground shipping within the lower 48 US states. Some restrictions apply.
-
Earn Rewards With Every Purchase
Learn MoreSimply sign up for free and start earning points for every purchase you make. Redeem your points for discounts or exclusive mountune merchandise.