1 6

Radium Engineering

Radium Engineering Catch Can System - Ford Focus RS

Radium Engineering Catch Can System - Ford Focus RS

20-0328-FL

$652.00
$687.00 $652.00
Sale Sold out
Supplied exclusively by Radium Engineering, their Catch Can system for the Ford Focus RS includes both the PCV and Crankcase Catch Can Kit. Both kits are easily installed on existing mounting points and plumbed using existing ports.

This crankcase catch can runs in line with the crankcase breather port. At low loads, it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience high flow out of the crankcase. This would normally lead to oil and sludge accumulation in the air filter intake pipe. Oil accumulation will occur in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance. This Catch Can is mounted towards the front of the engine bay.

This PCV catch can runs inline with the PCV (positive crankcase ventilation) valve and retains its factory function. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes, and, thus, this hose experiences no flow. Conversely, the PCV hose will experience a "metered" vacuum when the engine is idling, steady-state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high-load run. This Catch Can is mounted to the back of the cylinder head. Note: Because the Radium catch cans are pressure sealed, they are great for boosted applications so intake manifold connection is permitted.

Add two of the Radium Catch Can Drain kits for easy service.

Use the Catch Can System in conjunction with our optional Engine Block Breather plate PN 2363-OBP-AA for maximum performance. Select the option when ordering.
  • Prevents oil buildup in the intake and intercooler system walls, throttle body, intake manifold, etc.
  • Excessive oil collection can be an indicator of a damaged engine.
  • Lowers hydrocarbon emissions
  • Capacity: 6 fluid ounces each
  • Easy installation

Return Policy

You have 7 calendar days to return an item from the date you received it. To be eligible for a return, your item must be unused and in the same condition that you received it. Your item must be sealed in the original packaging. Your item needs to have a receipt or proof of purchase. Some exclusions apply.

For additional details see our Return & Refund Policy.

Installation Guides

To see all available installation and break-in instructions, click here.

Disclaimers & Legal

This part has been designed and is intended for off-highway application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations relating to emission requirements and motor vehicle safety standards.

Click Here for emissions compliance information.

California Residents Prop 65 Information
California’s Proposition 65 entitles California consumers to special warnings for products that contain chemicals known to the state of California to cause cancer and birth defects or other reproductive harm if those products expose consumers to such chemicals above certain threshold levels. This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information visit www.P65warnings.ca.gov.

View full details

  • Free Shipping Sitewide

    Orders of $100.00 or more are eligible for free ground shipping within the lower 48 US states. Some restrictions apply.

    Learn More 

  • Earn Rewards With Every Purchase

    Simply sign up for free and start earning points for every purchase you make. Redeem your points for discounts or exclusive mountune merchandise.

    Learn More